2. Using password to unlock Door Stations is only available for KD series door station. 3. Public password should be set as a format of 6 digits. 4. Up to 3 public passwords could be used. How to Set a Public Password for Unlocking Door Stations 1. After adding the device, please go to remote configuration as the following picture to set the It's because the new security strategy of Hikvision (IP address of the party trying to access the camera using wrong password is blocked). Either wait 30 minutes before login again or login to camera using differnet PC (different IP address). Try to login using the NVR password, then go to Configuration-> Advanced -> Security -> Security To change the encryption key on the recorder: log into the unti and bring up the main menu > go to 'system' > Network > Advanced > Platform Access. Select the field that has the encryption key/verification code and re-type what you want to have as the key. However the key must contain 6-12 characters including upper and lower case letters and To do this you would set your PC to the following network settings; IP address -192.168.1.10. sub-net -255.255.255.000. default gateway -192.168.1.1. As the camera in most cases is set for 192.168.1.64, when you login to the camera using a browser the first thing you should see if the camera has not been activated is a popup asking for you to Steps: Select the Add IP Camera option from the right-click menu in live view mode. or click Menu> Camera> Camera to enter the IP camera management interface. Note: For the IP camera detected online in the same network segment, the Security status shows whether it is Active or Inactive. Click the inactive icon of the camera to enter the dMKOTZx.

hikvision ip camera activation password